Top seller
Ready to ship, Stock Amount: >20 pcs
Ready to ship, Stock Amount: >20 pcs
Ready to ship, Stock Amount: >20 pcs
Ready to ship, Stock Amount: >20 pcs
Ready to ship, Stock Amount: 16 pcs
No results were found for the filter!
BEC 10A V2-Car UBEC Regler für 2-6s - Input Voltage: 2-6S LiPo
- Output: 6.0V / 7.4V / 8.4V
- Current cont./peak: 10A / 15A
- 45x20x16.2mm, 34g
Part No:
€32.90 *
Ready to ship, Stock Amount: 16 pcs
Step Down Voltage Regulator for UBEC With this wire you can drop the voltage by 0,7Volt for your Receiver or Servo. Simply plug the wire in-between the current connection and done. Technical Data: Voltage: minus 0,7V Wire female: JR / Futaba Wire male: JR
Part No:
€4.00 *
Ready to ship, Stock Amount: 4 pcs
DC Booster Output 6V 2A for 1s LiPo 1S DC-DC BOOSTER is a DC-DC power booster module which can draw power from the 1S Lipo battery then boosts it to the voltage (6V) suits the receiver & servo and provides the continuous output current up to 3Amp. 1S DC-DC BOOSTER is...
Part No:
€30.90 *
Ready to ship, Stock Amount: 3 pcs
RPM & Telemetry Signal Coupler Module (SCM) The RPM & Telemetry Signal Coupler Module, or SCM for short, solves the issues like: RPM signal from ESC cannot be correctly recognized by flybarless device GND level of Telemetry signal from ESC doesn't match the GND level of flybarless...
Part No:
€13.90 *
Ready to ship, Stock Amount: 17 pcs
Capacitors Module for Xerun ESC with 4 Capacitor Features Super low impedance. Low temperature in working state. Reduces the RF interference to make the RC model more reliable, Improves the burst power when the motor starts to run With its excellent "Ripple Current Endurance", the...
Part No:
€7.90 *
Ready to ship, Stock Amount: >20 pcs
Xerun 2848SD 4000kV - Brushless Sensored
- 1/12, 1/14 Onroad Offroad
- 2-3S, 4000kV
- 28.5x48mm, 100g
Part No:
€71.90 *
Ready to ship, Stock Amount: 18 pcs
VBAR Connection wire for Platinum 50cm With the update of the Platinum ESC v4/4.1 by Hobbywing, Mikado's remote control systems are now also supported. This cable is used to connect a VBar NEO with the corresponding ESC. Thanks to the additionally installed socket, the fan...
Part No:
€7.60 *
Ready to ship, Stock Amount: >20 pcs
Viewed