RC Electronic Accessories

Close filters
 
  •  
  •  
  •  
  •  
from to
1 From 5
No results were found for the filter!
ST8 Servo Tester
ST8 Advanced Servo Tester
The ST8 Servo Tester visually displays the performance data of servos. It is a true multifunction device with up to 28V output voltage, 8-channel signal output, integrated current measurement, data display as a graph, and many other...
TK30500
€57.90 *

Ready to ship, Stock Amount: >20 pcs

WM150 Leistungs Messgerät
WM150 Advanced Watt Meter
The WM150 Watt Meter allows for easy measurement of voltage, current, and power, which can be displayed on the LCD screen in various forms such as curve or bar graphs. Features: PWM output signal accurate to the millisecond Low voltage...
TK30600
€41.90 *

Ready to ship, Stock Amount: 16 pcs

MC8 Multichecker
MC8 Multichecker
The MC8 is a compact tool and measuring device. The sleek design, combined with the vibrant color IPS display, makes it easy and enjoyable to use. And with exceptional accuracy down to 5mV, this multi-checker sets a new standard in...
TK31600
€42.90 *

Ready to ship, Stock Amount: >20 pcs

BEC 25A UBEC Regler für 3-18s
BEC 25A UBEC ESC for 3-18s
  • Input Voltage: 3-18S LiPo
  • Output: 5.2V / 6.0V / 7.4V / 8.4V
  • Current cont./peak: 25A / 50A
  • 55x40.2x17.6mm, 34g
HW30606000
€68.90 *

Ready to ship, Stock Amount: >20 pcs

BEC 10A HV Air UBEC Regler für 3-14s
BEC 10A HV Air UBEC Regler für 3-14s
  • Input Voltage: 3-14S LiPo
  • Output: 6.0V / 7.4V / 8.4V
  • Current cont./peak: 10A / 25A
  • 55x25x12mm, 35g
HW30608000
€36.90 *

Ready to ship, Stock Amount: >20 pcs

BEC 5A V2-Air UBEC Regler für 2-8s
BEC 5A V2-Air UBEC Regler für 2-8s
  • Input Voltage: 2-8S LiPo
  • Output: 5.0V / 6.0V / 7.4V
  • Current cont./peak: 5A / 15A
  • 50x17x10mm, 21g
HW30607000
€15.90 *

Ready to ship, Stock Amount: >20 pcs

BEC 10A V2-Car UBEC Regler für 2-6s
BEC 10A V2-Car UBEC Regler für 2-6s
  • Input Voltage: 2-6S LiPo
  • Output: 6.0V / 7.4V / 8.4V
  • Current cont./peak: 10A / 15A
  • 45x20x16.2mm, 34g
HW30603003
€27.90 *

Available in 23 days

Elektronischer Schalter mit Spannungsanzeige
Electrical switch with voltage indicator
The Powerswitch was designed for replacing the mechanical switch to supply the receiver and servos in nitro cars. The switch is used to switch the receiver supply on and off inside the car. Beside that the Powerswitch informs you about...
R01612
€24.90 * €26.90 *

Ready to ship, Stock Amount: >20 pcs

Kondensator Modul für Xerun Regler mit 4 Kondensatoren
Capacitors Module for Xerun ESC with 4 Capacitor
Features Super low impedance. Low temperature in working state. Reduces the RF interference to make the RC model more reliable, Improves the burst power when the motor starts to run With its excellent "Ripple Current Endurance", the...
HW86030000
€7.90 *

Ready to ship, Stock Amount: >20 pcs

Drift Gyro GC401
Drift Gyro GC401
With all the inherited advantages of GC301, GC401 introduces three drive modes, which are selectable by pushing the button. GC-401 allows the racing car to travel in the specified direction and provides more accurate, stable, and more...
SK600142-02
€30.90 *

Ready to ship, Stock Amount: >20 pcs

MPS010 Power Switch Magnetisch 3-13 Volt, 7A
MPS010 Magnetic Power Switch 3-13 Volt, 7A
SK600155-01
€17.90 *

Ready to ship, Stock Amount: >20 pcs

Power Switch 4-12V 10Amp
Power Switch 4-12V 10Amp
SKYRC introduces the POWER SWITCH, a tiny MCU controlled on/off switch for your radio controlled model. A simple push button operates the switch meaning to eliminate theproblems associated with intermittent contact of an ordinary...
SK600054
€15.90 *

Ready to ship, Stock Amount: >20 pcs

1 From 5
Viewed