RC Electronic Accessories

Close filters
 
  •  
  •  
  •  
  •  
  •  
from to
1 From 4
No results were found for the filter!
ST8 Servo Tester
ST8 Advanced Servo Tester
The ST8 Servo Tester visually displays the performance data of servos. It is a true multifunction device with up to 28V output voltage, 8-channel signal output, integrated current measurement, data display as a graph, and many other...
TK30500
€63.90 *

Ready to ship, Stock Amount: >20 pcs

WM150 Leistungs Messgerät
WM150 Advanced Watt Meter
The WM150 Watt Meter allows for easy measurement of voltage, current, and power, which can be displayed on the LCD screen in various forms such as curve or bar graphs. Features: PWM output signal accurate to the millisecond Low voltage...
TK30600
€45.90 *

Ready to ship, Stock Amount: 3 pcs

MC8 Multichecker
MC8 Multichecker
The MC8 is a compact tool and measuring device. The sleek design, combined with the vibrant color IPS display, makes it easy and enjoyable to use. And with exceptional accuracy down to 5mV, this multi-checker sets a new standard in...
TK31600
€42.90 *

Ready to ship, Stock Amount: >20 pcs

Elektronischer Schalter mit Spannungsanzeige
Electrical switch with voltage indicator
The Powerswitch was designed for replacing the mechanical switch to supply the receiver and servos in nitro cars. The switch is used to switch the receiver supply on and off inside the car. Beside that the Powerswitch informs you about...
R01612
€24.90 * €26.90 *

Ready to ship, Stock Amount: >20 pcs

Micro Fail Save 4,8 - 6 Volt
Fail Save Micro Unit 4,8 - 6 Volt
Extrem kleiner Micro Fail Safe für 4,8-6V. Funktioniert mit jedem Fernsteuerungssystem. Ausgestattet mit Futaba Stecker. Abmessungen: 20x15x5mm
R01610
€20.90 *

Ready to ship, Stock Amount: 11 pcs

BEC 25A UBEC Regler für 3-18s
BEC 25A UBEC ESC for 3-18s
  • Input Voltage: 3-18S LiPo
  • Output: 5.2V / 6.0V / 7.4V / 8.4V
  • Current cont./peak: 25A / 50A
  • 55x40.2x17.6mm, 34g
HW30606000
€81.90 *

Ready to ship, Stock Amount: >20 pcs

BEC 8A UBEC Regler für 2-3s
BEC 8A UBEC ESC for 2-3s
The 8A-UBEC is a switch-mode DC-DC regulator works with 2S to 3S Lipo battery, and outputs a consistent safe power supply for your receiver, gyro and servos. It is very suitable for large scale RC models with many Servos like a nitro...
HW86010030
€23.90 *

Delivery time unknown.

BEC 10A HV Air UBEC Regler für 3-14s
BEC 10A HV Air UBEC Regler für 3-14s
  • Input Voltage: 3-14S LiPo
  • Output: 6.0V / 7.4V / 8.4V
  • Current cont./peak: 10A / 25A
  • 55x25x12mm, 35g
HW30608000
€43.90 *

Ready to ship, Stock Amount: >20 pcs

BEC 5A V2-Air UBEC Regler für 2-8s
BEC 5A V2-Air UBEC Regler für 2-8s
  • Input Voltage: 2-8S LiPo
  • Output: 5.0V / 6.0V / 7.4V
  • Current cont./peak: 5A / 15A
  • 50x17x10mm, 21g
HW30607000
€15.90 *

Ready to ship, Stock Amount: >20 pcs

BEC 10A V2-Car UBEC Regler für 2-6s
BEC 10A V2-Car UBEC Regler für 2-6s
  • Input Voltage: 2-6S LiPo
  • Output: 6.0V / 7.4V / 8.4V
  • Current cont./peak: 10A / 15A
  • 45x20x16.2mm, 34g
HW30603003
€33.90 *

Ready to ship, Stock Amount: >20 pcs

Step Down Voltage Regulator für UBEC
Step Down Voltage Regulator for UBEC
With this wire you can drop the voltage by 0,7Volt for your Receiver or Servo. Simply plug the wire in-between the current connection and done. Technical Data: Voltage: minus 0,7V Wire female: JR / Futaba Wire male: JR
HW86060050
€4.00 *

Ready to ship, Stock Amount: >20 pcs

DC Booster Ausgang 6V 2A für 1s LiPo
DC Booster Output 6V 2A for 1s LiPo
1S DC-DC BOOSTER is a DC-DC power booster module which can draw power from the 1S Lipo battery then boosts it to the voltage (6V) suits the receiver & servo and provides the continuous output current up to 3Amp. 1S DC-DC BOOSTER is...
HW30601000
€34.90 *

Ready to ship, Stock Amount: 5 pcs

1 From 4
Viewed