No results were found for the filter!
Electrical switch with voltage indicator Electronic receiver switch for nitro cars with 3-LED charge indicator, battery error detection and 10 A maximum current. Input voltage: 3.5–10 V.
Part No:
Content 1 Stück
€24.90 * €26.90 *
Ready to ship, Stock Amount: >20 pcs
BEC 25A UBEC ESC for 3-18s - Input Voltage: 3-18S LiPo
- Output: 5.2V / 6.0V / 7.4V / 8.4V
- Current cont./peak: 25A / 50A
- 55x40.2x17.6mm, 34g
Part No:
€68.90 *
Ready to ship, Stock Amount: >20 pcs
BEC 10A HV Air UBEC Regler für 3-14s - Input Voltage: 3-14S LiPo
- Output: 6.0V / 7.4V / 8.4V
- Current cont./peak: 10A / 25A
- 55x25x12mm, 35g
Part No:
€36.90 *
Ready to ship, Stock Amount: >20 pcs
BEC 5A V2-Air UBEC Regler für 2-8s - Input Voltage: 2-8S LiPo
- Output: 5.0V / 6.0V / 7.4V
- Current cont./peak: 5A / 15A
- 50x17x10mm, 21g
Part No:
€15.90 *
Ready to ship, Stock Amount: >20 pcs
BEC 10A V2-Car UBEC Regler für 2-6s - Input Voltage: 2-6S LiPo
- Output: 6.0V / 7.4V / 8.4V
- Current cont./peak: 10A / 15A
- 45x20x16.2mm, 34g
Part No:
€27.90 *
Ready to ship, Stock Amount: >20 pcs
Ready to ship, Stock Amount: >20 pcs
Power Switch 4-12V 10Amp MCU-controlled SkyRC POWER SWITCH for RC models, with push-button operation, NiMH/NiCad and LiPo modes, and 6.2 V LiPo low-voltage protection.
Part No:
€15.90 *
Available in 5 days
Ready to ship, Stock Amount: >20 pcs
Step Down Voltage Regulator for UBEC Hobbywing step-down regulator wire reduces receiver or servo voltage by 0.7 V. It has a JR / Futaba female connector and a JR male connector.
Part No:
€5.90 *
Ready to ship, Stock Amount: 12 pcs
DC Booster Output 6V 2A for 1s LiPo DC-DC booster for 1S LiPo or 3–4 Cell NiMH, providing 6 V for a receiver and servo. Continuous output current is 3 A, with 6 A burst.
Part No:
€25.90 *
Ready to ship, Stock Amount: 2 pcs
Viewed