Brand: 
XERUN AXE 5IVE R3
FOC-sensored brushless ESC for 1/5 and 1/6 rock crawlers, 3–8S LiPo, 220 A continuous current.
- Item number
- HW30114000
- EAN
- 6938994408776
RRP €163.90
Description
The XeRun AXE 5IVE R3 is a FOC-sensored brushless ESC for 1/5 and 1/6 rock crawlers. It operates on 3–8S LiPo and delivers 220 A continuous and 900 A peak current. The FOC drive mode applies high torque from very low speeds and runs noticeably quieter than conventional drive systems.
The intelligent torque control increases output on climbs and reduces it on descents, keeping vehicle speed steady and controllable. The adjustable drag brake reaches up to 200%, and the drag brake rate is adjustable as well. 22 adjustable parameters and turbo timing of up to 24° allow fine tuning for vehicle and terrain.
The built-in ultra-high-voltage BEC outputs 6–14 V in 0.1 V increments at 15 A continuous current (max. 35 A) — enough for standard, high-voltage and ultra-high-voltage servos as well as accessories such as lighting systems and winches. The white and yellow signal wires allow parameters such as drag brake force to be changed from the transmitter while driving.
Settings, real-time data (throttle, voltage, current, temperature and motor speed) and firmware updates run via built-in Bluetooth and the HW Link app; telemetry and tuning are also supported by FlySky NB4 transmitters. The fan switches on only when a preset temperature is reached, and the housing is rated to IP67. Compatible exclusively with XERUN AXE 4987 R3S and AXE 4274 R3 series motors.
Notes
- Note on receivers: most receivers are rated for max. 9 V — check receiver compatibility before setting the BEC output above 8.4 V.
- Only for XERUN AXE 4987 R3S and AXE 4274 R3 motors; the AXE 4274 R3 is operated up to 6S LiPo only.
- Connect the sensor connectors of ESC and motor following the arrow marks and tighten them.
- Disconnect the battery after use — even when switched off the system draws a small quiescent current and can discharge the battery deeply.
- IP67 protects against splashes, short-term water contact and dust under normal conditions; avoid prolonged submersion, protection diminishes with wear.
- Perform the throttle calibration on first use and whenever a new receiver is installed.
- Remove the pinion gear or run the wheels off the ground when calibrating and programming.
- Bluetooth range approx. 5 m.
Highlights
- FOC drive mode for high torque from low speeds
- 3–8S LiPo, 220 A continuous current, 900 A peak current
- BEC 6–14 V in 0.1 V steps, 15 A continuous current (max. 35 A)
- Two AUX signal wires for adjustments directly at the transmitter
- Built-in Bluetooth, settings and firmware updates via HW Link app
- Drag brake up to 200%, force and rate adjustable
- 4 driving modes, 22 parameters, turbo timing up to 24°
- IP67 protection against water and dust, intelligent fan control
Specifications
| Scale | 1/5th, 1/6th |
|---|---|
| Brushed/Brushless | Brushless |
| Sensored/Sensorless | Sensored |
| Waterproof | Yes, IP67 |
| Current (Cont./Peak) | 220 A / 900 A |
|---|---|
| Input Voltage | 3–8S LiPo |
| BEC Output | 6–14 V, 15 A continuous (max. 35 A) |
| Input Wires | 1× red, 10 AWG, 300 mm · 1× black, 10 AWG, 300 mm |
|---|---|
| Output Wires | – |
| Input Connectors | – |
| Output Connectors | 6.5 mm connectors (female) |
| Type | Framed |
|---|---|
| Dimensions (L × W × H) | 40 × 40 × 10 mm |
| Voltage Range | 6–8.4 V |
| Power Supply | BEC |
| SET Button | Not supported |
|---|---|
| LED Program Box | Not supported |
| LCD Program Box G2 | Not supported (discontinued) |
| LCD Program Box PRO | Not supported |
| OTA Programmer | Not supported |
| Programming Port | Built-in Bluetooth (HW Link app) |
| Extreme Values | Not supported |
|---|---|
| Real-Time Data | Supported |
| Historical Data (Graph) | Supported |
| External OTA Historical Data (Graph) | Not supported |
| Firmware Update | Supported |
|---|
| Dimensions (L × W × H) | 70.2 × 56.3 × 45.5 mm (with capacitor) |
|---|---|
| Weight | 308.2 g (including input wires) |
| Motor Types | Only XERUN AXE 4987 R3S and AXE 4274 R3 series |
|---|---|
| Application | 1/5 and 1/6 rock crawler |
Documents
Safety & manufacturer
Manufacturer
Hobbywing
Item number: HW30114000
EAN: 6938994408776
Responsible person in the EU
Safety information
- Contains small parts.
- Keep away from children.
- Not suitable for children under 14 years of age.
Reviews
There are no reviews of this product yet.
Only customers who bought this product from us can review it. We check every review before it is published.
