No results were found for the filter!
Heli Servo Dig/MG/BB/Metal/Std. 0,04 sec/6,4kg 71,8g Voltage : 4,8 V - 6,0 V Torque (7.4V): 6,40 kgcm Torque (6.0V): 5,20 kgcm Speed (7.4V): 0.04 s/60° Speed (6.0V): 0.05 s/60° Elektronic : Digital Case : Alu Ballbearings : 2 Gears : Metall Motor : Coreless Weight : 71.8g Dimensions :...
Part No:
€119.00 *
Ready to ship, Stock Amount: 17 pcs
Heli Servo Dig/MG/BB/Std. 0,04 sec/6,4kg 62g Voltage : 4,8 V - 6,0 V Torque (7.4V): 6,40 kgcm Torque (6.0V): 5,20 kgcm Speed (7.4V): 0.04 s/60° Speed (6.0V): 0.05 s/60° Elektronic : Digital Case : Alu - Middlecase Ballbearings : 2 Gears : Metall Motor : Coreless Weight : 62.0g...
Part No:
€99.00 *
Ready to ship, Stock Amount: >20 pcs
Heli HV Servo Dig/MG/BB/Std. 0,09 sec/16,8kg 62,4g Voltage : 6.0 V - 7.4 V Torque (7.4V): 16.80 kgcm Torque (6.0V): 14.20 kgcm Speed (7.4V): 0.09 s/60° Speed (6.0V): 0.12 s/60° Elektronic : Digital Case : Alu - Middlecase Ballbearings : 2 Gears : Metall Motor : Coreless Weight : 62.4g...
Part No:
€99.00 *
Ready to ship, Stock Amount: 16 pcs
Heli HV Servo Dig/MG/BB/Std. 0,06 sec/11,1kg 62,1g Voltage : 6.0 V - 7.4 V Torque (7.4V): 11.10 kgcm Torque (6.0V): 9.90 kgcm Speed (7.4V): 0.06 s/60° Speed (6.0V): 0.08 s/60° Elektronic: Digital Case : Alu - Middlecase Ballbearings : 2 Gears : Metall Motor : Coreless Weight : 62.1g...
Part No:
€99.00 *
Ready to ship, Stock Amount: 16 pcs
Electrical switch with voltage indicator The Powerswitch was designed for replacing the mechanical switch to supply the receiver and servos in nitro cars. The switch is used to switch the receiver supply on and off inside the car. Beside that the Powerswitch informs you about...
Part No:
€24.90 * €26.90 *
Ready to ship, Stock Amount: >20 pcs
Fail Save Micro Unit 4,8 - 6 Volt Extrem kleiner Micro Fail Safe für 4,8-6V. Funktioniert mit jedem Fernsteuerungssystem. Ausgestattet mit Futaba Stecker. Abmessungen: 20x15x5mm
Part No:
€20.90 *
Delivery time unknown.
BEC 25A UBEC ESC for 3-18s - Input Voltage: 3-18S LiPo
- Output: 5.2V / 6.0V / 7.4V / 8.4V
- Current cont./peak: 25A / 50A
- 55x40.2x17.6mm, 34g
Part No:
€76.90 *
Ready to ship, Stock Amount: >20 pcs
BEC 10A HV Air UBEC Regler für 3-14s - Input Voltage: 3-14S LiPo
- Output: 6.0V / 7.4V / 8.4V
- Current cont./peak: 10A / 25A
- 55x25x12mm, 35g
Part No:
€42.90 *
Ready to ship, Stock Amount: >20 pcs
BEC 5A V2-Air UBEC Regler für 2-8s - Input Voltage: 2-8S LiPo
- Output: 5.0V / 6.0V / 7.4V
- Current cont./peak: 5A / 15A
- 50x17x10mm, 21g
Part No:
€15.90 *
Ready to ship, Stock Amount: >20 pcs
BEC 10A V2-Car UBEC Regler für 2-6s - Input Voltage: 2-6S LiPo
- Output: 6.0V / 7.4V / 8.4V
- Current cont./peak: 10A / 15A
- 45x20x16.2mm, 34g
Part No:
€32.90 *
Ready to ship, Stock Amount: >20 pcs
Step Down Voltage Regulator for UBEC With this wire you can drop the voltage by 0,7Volt for your Receiver or Servo. Simply plug the wire in-between the current connection and done. Technical Data: Voltage: minus 0,7V Wire female: JR / Futaba Wire male: JR
Part No:
€4.00 *
Ready to ship, Stock Amount: 4 pcs
DC Booster Output 6V 2A for 1s LiPo 1S DC-DC BOOSTER is a DC-DC power booster module which can draw power from the 1S Lipo battery then boosts it to the voltage (6V) suits the receiver & servo and provides the continuous output current up to 3Amp. 1S DC-DC BOOSTER is...
Part No:
€30.90 *
Ready to ship, Stock Amount: 3 pcs
Viewed