Skip to content
Robitronic
Log inSaved itemsNewsHelp & contactBecome a dealer

Language

Fast shipping on over 11,000 products
Log in
New

Image 1 of 4

Hyper VS2 Brushless Truggy 1/8 150A 6s RTR Green, image 1

Brand: HoBao

Hyper VS2 Brushless Truggy 1/8 150A 6s RTR Green

Ready-to-run 1/8 truggy in black and green with brushless power for 4S–6S

Item number
HB-VSTE-C150GN
EAN
4046032136245
€639.90incl. VAT, plus shipping

RRP €639.90

Expected to be available from 3 Jan 2027

We'll email you as soon as the item is back in stock.

Description

The HoBao Hyper VS2 Truggy (VS2T) is a ready-to-run 1/8 scale electric truggy with four-wheel drive. The centre differential is positioned towards the front, for forward weight distribution.

The batteries sit in the chassis as a dual or single battery setup; the single battery tray goes in the front, centre or rear. It takes shorty and standard-length packs, and shorty packs slide fore and aft to fine-tune centre of gravity and weight distribution. The arm holders have pill inserts: upper for roll centre, camber and caster, front and rear CNC aluminium holders for toe and anti-squat.

Notes

  • Also required: LiPo batteries with a pair of XT90 connectors, charger, AA batteries for the transmitter.
  • Motor mount: for motors below 50 mm diameter. The motor support fits 40 mm and 42 mm motors only; with a 40 mm motor fit the black plastic hoop first, with a 42 mm motor it is not needed. Motors above 42 mm are fitted without the motor support.
  • Optional pinion and ring gears: 13T/43T (87028, 85111) and 15T/40T (OP-0146, OP-0147). The 15T/40T setup puts more stress on the drivetrain and electronics; the related parts should be upgraded accordingly.
  • Option parts for chassis and drivetrain: carbon fibre centre top brace OP-0195, 7075 aluminium gearbox OP-0183, CNC aluminium differential case OP-0148, rear universal joint driveshafts 85212.
  • Option parts for suspension and wheels: shock pistons OP-0192, OP-0193, OP-0194; springs soft OP-0196/OP-0198, hard OP-0197/OP-0199; anti-roll bars OP-0110, OP-0111; titanium turnbuckles OP-0201, OP-0202; brass pivot balls OP-0191; aluminium steering blocks OP-0190; aluminium rear hubs 89147; carbon fibre arm inserts OP-0185, OP-0186, OP-0187.
  • Wheels also available in black (92009B), white (92009W) and yellow (92009Y).

Highlights

  1. CNC machined metal parts; shafts and cups in hardened steel; ball bearing set
  2. Front, centre and rear differentials with metal bevel gears and anti-leak housings
  3. Stainless steel skid plates, chassis wire pass-through, CNC aluminium cam-lock motor mount
  4. Big bore shocks: aluminium bodies, adjustment ring, high-hardness steel shafts, alu cap
  5. Steering with 7075 rack, hard spring, aluminium steering arms, ball-bearing servo saver
  6. Pivot-ball suspension, hard-anodised aluminium pivot balls; reinforced arms, wider upper

Specifications

General
Scale1/8
Drivetrain4WD
Bodyprinted, black and green
Width420 mm
Height220 mm
Wheelbase374 mm
Track (Front)348 mm
Track (Rear)346 mm
Top Bracealuminium, 2 mm, laser-engraved
Shock TowersCNC 7075 aluminium, 5 mm
Centre Spur Gear45T (MOD 1)
Differential Oilfront #20,000, centre #20,000, rear #7,000
Centre Driveshafts (Dual Battery Layout)dogbone Ø4.5 mm, front 95 mm / rear 147 mm
Centre Driveshafts (Single Battery Layout, Optional)dogbone Ø4.5 mm, front 64 mm / rear 182 mm
Front Driveshaftsuniversal driveshafts Ø4.5 mm, 130 mm
Rear Driveshaftsdogbone Ø4.5 mm, 131 mm
Shock Pistons1.5 mm × 3 holes
Shock Oilfront #500, rear #500
Front Springs1 kg/cm, 65 mm, orange
Rear Springs0.85 kg/cm, 85 mm, orange
Anti-Roll Bars2.5 mm front / 2.8 mm rear
Camberadjustable
Casteradjustable
Camber Shims (85172)6.1 × 12 × 1 mm (upper pivot ball), 6.1 × 12 × 2 mm (lower pivot ball)
Wheels3.9 inch, dish design, green
Tyres3.7 inch, mini rectangle pin, with inserts
Motorbrushless, 2000kV, 4-pole, outer diameter 40 mm, shaft Ø5 mm
Pinion14T
Servodigital, metal gear, 18 kg·cm, 4.8–6 V
Radio System3-channel, 2.4 GHz FHSS, dual rate for steering and throttle
Dimensions
Length560 mm
Chassis
ChassisCNC 7075 aluminium, 3 mm, hard-anodised
Drivetrain Components
Pinion / Ring Gear10T / 46T (MOD 1)
Suspension
Shock Absorbersaluminium big bore, 17 mm ID, 4 mm shaft
Wheels and Tyres
Wheel Hexes17 mm hex, front and rear
Electronics
ESCHobbywing 150 A, waterproof, 4S–6S, pair of XT90 connectors, cooling fan, program card

In the box

  • 1 × Ready-to-run model with ESC, motor, servo, receiver and printed body
  • 1 × Transmitter, 3-channel, 2.4 GHz FHSS
  • 1 × ESC program card

Documents

Safety & manufacturer

Manufacturer

HoBao

Item number: HB-VSTE-C150GN

EAN: 4046032136245

Responsible person in the EU

Robitronic Electronic GmbH
Pfarrgasse 50, 1230 Wien, Austria (AT)

Safety information

  • Contains small parts.
  • Keep away from children.
  • Not suitable for children under 14 years of age.

Reviews

There are no reviews of this product yet.

Only customers who bought this product from us can review it. We check every review before it is published.

Spare parts

All 159 spare parts in the spare parts finder

Hyper VS2 Brushless Truggy 1/8 150A 6s RTR Green

€639.90incl. VAT
Buy