Hobbywing Ezrun MAX10 G2S ESC 140 Amp, 2-4s LiPo, BEC 5A
- Part No: HW30102500
- Retail: €106.90
- EAN: 6938994405614
The Ezrun MAX10 G2S is the consistent evolution of the MAX10 G2: identical power ratings, identical case - but an ESC that can be set up without any additional hardware. The Bluetooth module sits inside the power switch, the connection to the smartphone runs through the HW LINK app, and parameter setup, data review and firmware updates all run through it.
In sensored operation the ESC delivers linear, stable power across the entire speed range: strong on launch, precise in slow technical sections and consistent under sustained full throttle or over jumps. The housing with its integrated heatsink and the frameless fan, which discharges its air out of the sides, keep temperatures down. The fan stays off while temperatures remain low and only starts once a preset threshold is reached.
Three things are new compared to the MAX10 G2: the integrated Bluetooth, the internal data logging and the third BEC step of 8.4V for high-voltage servos.
Features
- Bluetooth module integrated into the power switch - programming straight from a smartphone, no extra devices
- Internal data logging of the last 10 minutes of runtime, reviewed graphically in the HW LINK app
- Turbo timing up to 32 degrees - up to approx. 25% higher maximum RPM with an Ezrun 3652/3665 G3 motor
- Three-step BEC: 6V / 7.4V / 8.4V at 5A in switch mode
- Frameless fan with side air discharge, switched in by temperature
- Waterproof sensor interface, dust- and waterproof to IP67
- Capacitor overheat protection
- Two programming routes: Bluetooth app or LCD program box
- Firmware upgrade via the app
- Protection against low voltage, overheating and loss of signal
Technical Specifications
| Type | 1/10 brushless, sensored and sensorless |
| Current (cont./peak) | 140A / 880A |
| Input Voltage | 2-4S LiPo |
| BEC | 6V / 7.4V / 8.4V adjustable, 5A continuous (switch mode) |
| Motor Types | Brushless motors with and without sensor |
| Motor Limits | 2S LiPo: KV <= 6000 (3652 size motor) 3S LiPo: KV <= 4000 (3665 size motor) 4S LiPo: KV <= 2600 (4268 size motor) |
| Turbo Timing | up to 32 degrees |
| Fan | Yes, powered by the BEC |
| Programming | Bluetooth (HW LINK app) LCD program box OTA program module |
| Programming Port | Separate, 3-pin |
| Waterproof | Yes, to IP67 |
| Input | XT60 |
| Output | Gold bullet sockets |
| Dimensions | 53 x 39.5 x 37.2 mm |
| Weight | 125 g (incl. wires and connectors) |
| Application | 1/10 Short Course Truck, Truck and Monster Truck |
Note: A 3S battery or larger is required for 7.4V or 8.4V at the BEC. Turbo timing and motor overheat protection only work with a supported Hobbywing motor, for example the Ezrun 3652/3665 SD G3. The effective Bluetooth range is approx. 5 m by design.
Delivery
- 1x Ezrun MAX10 G2S ESC 140A
Optional Accessories
- HW30502002 LCD Program Box Pro
- HW30850400 OTA Bluetooth Program Module
