No results were found for the filter!
NEW
Hyper GO 10303 1/10 Citroen C3 WRC 4WD The MJX Hyper GO 10303 Citroën C3 WRC is a powerful 1/10 rally/drift car with a licensed C3 WRC body, brushless power, and precise driving dynamics. A 7075 aluminum chassis, all-metal drivetrain, gyro stabilization (G3C), and a sensored...
Part No:
€249.90 *
Available in 36 days
NEW
Hyper GO 10304 1/10 Volkswagen Polo R WRC 4WD The MJX Hyper GO 10304 Volkswagen Polo R WRC is a powerful 1/10 rally/drift car with a licensed Polo R WRC body, brushless power, and precise driving dynamics. A 7075 aluminum chassis, all-metal drivetrain, gyro stabilization (G3C), and...
Part No:
€249.90 *
Available in 36 days
NEW
Combo WP10BL80-G2 QuicRun Outer 3530SL-1700kV With this powerful crawler combo, you can drive your vehicle safely and in full control through rough terrain! Together with the QuicRun Outer 3530SL motor, the QuicRun WP10BL80 ESC is perfectly matched and the ideal choice for 1/10...
Part No:
€85.90 *
Ready to ship, Stock Amount: 1 pcs
NEW
BLS4355 Brushless 61KG/0.009sec@8.4V DSSERVO BLS4355 - Brushless digital servo with up to 61kgcm torque Features: Highly efficient brushless motor for maximum power and smooth operation Up to 61kgcm torque at 8.4V ideal for large scale models, crawlers and high-end 1/8...
Part No:
€45.90 *
Available in 11 days
NEW
DS4125 Low Profile 29KG/0.15sec@7.4V DSSERVO DS4125 - Powerful 25kg digital servo Features: High-torque digital servo with up to 29kgcm torque at 7.4V Precision 3-pole motor IP66 ideal for off-road use and harsh environments Wide operating voltage range from 4.8V to 7.4V...
Part No:
€14.90 *
Available in 11 days
NEW
BH125W BL Servo HV 125.0kg/0.085sec @8,4V SRT-Racing – BH125W HV Brushless Servo for 1/5 & 1/6 Scale Cars The BH125W is an extremely powerful high-voltage servo for large-scale cars. Its fully CNC-machined aluminum case with slotted heat-sink design, stainless-steel gear train...
Part No:
€161.00 *
Ready to ship, Stock Amount: 10 pcs
NEW
Combo WP10BL80-G2 QuicRun Outer 3530SL-2200kV With this powerful crawler combo, you can drive your vehicle safely and in full control through rough terrain! Together with the QuicRun Outer 3530SL motor, the QuicRun WP10BL80 ESC is perfectly matched and the ideal choice for 1/10...
Part No:
€85.90 *
Ready to ship, Stock Amount: >20 pcs
NEW
BHMX2 Brushless Servo HV i-BUS2 80mm cable... SRT-Racing – BHMX2 with 80mm wire! Features: Brushless motor, robust metal gears Excellent efficiency and low power consumption High-quality aluminum housing 25T output shaft NMB dual bearings Support for SR, SFR, SUR, SXR Technical...
Part No:
€126.00 *
Ready to ship, Stock Amount: >20 pcs
NEW
PA01 ProArt Radio The FlySky PA01 (ProArt) is a compact high-end open-source transmitter with EdgeTX , switchable internal AFHDS 3 / ExpressLRS RF, and a clever gamepad form factor. The 2.4" color IPS screen and the integrated USB-C interface for updates,...
Part No:
€193.00 *
Available in 45 days
NEW
Telemetry Adapter iBTA01 I-BUS2 The FlySky iBTA01 is a compact i-BUS2 telemetry adapter that converts data from compatible devices (e.g., Hobbywing ESCs) into the i-BUS2 protocol and transmits it to your FlySky transmitter in real time. With a memory card (512 MB8 GB),...
Part No:
€19.90 *
Available in 8 days
NEW
INr8-8D AFHDS3 Receiver 8CH LED The FlySky INr8-8D is a versatile 8-channel AFHDS 3 receiver with integrated light control . Thanks to bidirectional communication and multiple signal outputs (PWM/PPM/i-BUS2/S.BUS/i-BUS), the receiver can be used very flexibly....
Part No:
€49.90 *
Available in 8 days
NEW
R11P ANT Receiver 11CH The FlySky FS-R11P is a compact 11-channel ANT receiver for RC cars and boats. It supports PWM, PPM, i-BUS, S.BUS and i-BUS2, and its bidirectional ANT link enables telemetry and model setup directly via compatible FlySky transmitters...
Part No:
€25.90 *
Available in 8 days
Viewed