Article successfully added.

Ball Bearing Ceramic 5x10x4mm with oil (1 pcs.)

Kugellager Keramik 5x10x4mm geölt (1 Stk.)
€7.40 *

Prices incl. VAT plus shipping costs

Ready to ship, Stock Amount: 12 pcs

  • R18010
  • €7.40
  • 4046032014604
Ready to use, quick drying, fuel resitant light weight paint for racing, If wished for up-to 15... more
Product information "Ball Bearing Ceramic 5x10x4mm with oil (1 pcs.)"

Ready to use, quick drying, fuel resitant light weight paint for racing, If wished for up-to 15 gr less weight on a 1/10 scale race body, compard to pre-painted or water based coloured bodies (lower cenre of gravity)

RC Car Colours have been specially developed for the painting of Polycarbonate bodies. The special solvent used etches the surface, allowing the paint to bond permanently with the polycarbonate.
Before you begin ... Remove any dirt particles from the surface to be painted.


Polycarbonate bodies

  • Cut out the body and sand the cut edges.
  • Many bodies have a transparent protective foil on the outside. Do not remove this protective foil until the paints has dried! Mask all areas that are not to be painted, by using masking film or masking tape.
  • First paint the dark and then the light colours so as to prevent the dark colours from shining through the lighter ones.
  • Always check to make sure that the surfaces are dry and free of dust before painting!


For best results

  1. Before use, shake the can vigorously for approx. 2 min. until you hear the mixing ball rattling.
  2. Spray at a distance of approx. 20 to 30 cm. While spraying make even cross movements with the can.
  3. The covering capacity of RC Car Colours varies slightly from one colour to the next. Always spray one very light coat at a time to avoid bleeding. The final result is obtained after 2 to 3 coats. Wait approx. 5 min. before applying the next coat. Never spray just one heavy coat!
  4. Allow the paint to dry for 5 minutes before removing the masking film and applying the next coat.
  5. After use, turn the can upside down and spray for 2 sec. until the nozzle is empty.


Special instructions for fluorescent colours

  • Fluorescent colours appear not to cover as well as normal colours. While spraying you must absolutely make sure to apply only very light coats.
  • Always use at temperatures above 15°C.
  • Spray from a distance of +/-15/20 cm.
  • Allow the colour to dry for 30 min. and back the fluorescent colour with white RC Car Colour.
  • Only then the desired fluorescent effect will be obtained!


Content:
100ml

Read, write and discuss reviews... more
Customer evaluation for "Ball Bearing Ceramic 5x10x4mm with oil (1 pcs.)"
Write an evaluation
Evaluations will be activated after verification.

The fields marked with * are required.

Die Datenschutzbestimmungen habe ich zur Kenntnis genommen

Artikel ist für folgende Modelle geeignet more
Dieser Artikel ist für folgende Modelle geeignet
Lexan Farbe Schwarz Nr 610 150ml Lexan Spray Black Nr 610 150ml
RCC610
Content 0.15 Liter (€38.67 * / 1 Liter)
€5.80 *
Reifenspezialkleber (20g) Superglue for Tire (20g)
L300
Content 20 Gramm (€27.00 * / 100 Gramm)
€5.40 *
Motorritzel Modul 0,6 20Z Pinion Module 0,6 20T
RW0620
€6.90 *
e3 Ladegerät LiPo 2-3s 1,2A e3 LiPo 2-3s 1,2A Charger
SK100081
€15.90 *
Ladekabel Banane -> High Amp Charging Wire Banana -> High Amp
R19035
€4.00 *
Spurstangen Schlüssel 4mm Turnbuckle Wrench 4mm
EDS-190009
€10.30 *
Nitro Starterbox LB550 Universal Universal Starterbox LB550
R06011
€49.00 *
Lexan Schere gebogen Curved Scissor
R06207
€5.40 *
Motorritzel Modul 0,6 22Z Pinion Module 0,6 22T
RW0622
€6.90 *
Capacitor Module-Non Polarity-Standard Capacitors Module Non-Polarity
HW30840005
€19.90 *
Programmier Box für Torro Fahrtenregler Toro Program Box for Torro ESC
SK300046
€19.90 *
Motorritzel 32dp 14Z Bohrung 3,17mm Pinion 32dp 14T Bore 3,17mm
RW3214
€6.90 *
Maskier Flüssigkeit (40 ml) Liquid Mask medium (40ml)
KB48066
Content 40 ml (€20.00 * / 100 ml)
€8.00 *
Klinge Innensechskantschlüssel 2.0 x 120mm Tip Hex Wrench 2.0 x 120mm
EDS-111120
€6.10 *
Luftfilter-Dirtbag 1:8 (2 Stk) Air Filter Cover 1:8 (2 pcs)
R07112
€3.20 *
Tankflasche "Competition Line" 500ml Fuel Bottle "Competition Line" 500ml
R06106
€12.10 *
Lexanbohrer Rot mit Schutzkappe Reamer with Cover Red Anodized
R06204R
€19.30 *
Lexan Farbe Honda Orange Nr 945 150ml Lexan Spray Honda Orange Nr 945 150ml
RCC945
Content 0.15 Liter (€38.67 * / 1 Liter)
€5.80 *
Personal Transponder Personal Transponder
RS163
€29.60 *
Combifiller (70g) Combifiller (70g)
L307
Content 70 Gramm (€9.57 * / 100 Gramm)
€6.70 *
e430 AC Ladegerät LiPo 2-4s 1-3A 30W e430 AC LiPo 2-4s 1-3A 30W Charger
SK100107
€22.90 *
Lexan Farbe Fluo Dunkel Rot Nr 1010 150ml Lexan Spray Fluo Deep Red Nr 1010 150ml
RCC1010
Content 0.15 Liter (€38.67 * / 1 Liter)
€5.80 *
Motorritzel Modul 1 22Z Bohrung 5mm Pinion Module 1 22T Bore 5mm
RW1022
€8.90 *
Motorritzel Modul 1 18Z Bohrung 5mm Pinion Module 1 18T Bore 5mm
RW1018
€8.90 *
Auto Montagestand 1:8 grau (drehbar & fixierbar) Car Works Stand 1:8 grey (8 Locking)
R15001G
€26.70 *
Servo Arm Alu 25Z Grau Kurz Servo Arm Alu 25Z Grey Short
R17022G
€10.90 *
e3 Duo AC LiPo 2-3s 2.2A 2 Kanal e3 Duo AC LiPo 2-3s 2.2A 2 Kanal
SK100164
€35.90 *
B6DC V2 Ladegerät LiPo 1-6s 6A 60W B6DC V2 LiPo 1-6s 6A 60W Charger
SK100161
€39.00 *
B6 Lite DC Ladegerät LiPo 1-6s 13A 220W B6 Lite DC LiPo 1-6s 13A 220W Charger
SK100151
€49.00 *
Kupplungsglocke belüftet 13Z & Kugell. Ø12mm Clutch Bell 13T w/Bearing 12mm
HFR-24D
€17.00 *
LiPo Akku 4200mAh 2S 40C T-Stecker Stick Pack LiPo Battery 4200mAh 2S 40C T-Plug Stick Pack
R05232
€26.90 * €29.90 *
Glide Power XT Gleitfliud (25 ml) Glide Power XT slide lubricant (25 ml)
DF081
Content 25 ml (€78.40 * / 100 ml)
€19.60 *
Kreuzschlitz Schraubendreher 3.5 x 60mm Phillips Screwdriver 3.5 x 60mm
EDS-140134
€12.30 *
Kreuzschlitz Schraubendreher 2.0 x 60mm Phillips Screwdriver 2.0 x 60mm
EDS-140120
€12.30 *
Kugellager 5x10x4mm Bearing 5x10x4mm
RSU00084
€8.00 *
Sekundenkleber Dick (20g) Superglue thick (20g)
L303
Content 20 Gramm (€17.00 * / 100 Gramm)
€3.40 *
Viewed